We generally use the paste feeder machines are used to make the carton, so we produce are technical points and technical points carton as, at present, we have summarized the following points for enterprises points:
(1) check production orders, production samples to check whether the material qualified.
(2) before mass production do the first article inspection to confirm.
(3) a combination of box body. The good die stacked cardboard placed on the Taiwan case, even to the little side edge gluing; the brush glue four sides of cardboard propped up, big pressure on the small side edges, with two taut rubber band wrong angle of 45 ° are stacked on pallets, self-qualified, hanging badges, to be dried into the next process.
(4) mounted cartridge body. Glossy uniform coating to the cartridge body, the cartridge type accurately placed on the border of the tissues in the back; put the auxiliary block 90 ° angle to the four sides bent downward; remove the auxiliary block the bleeding edge inward fold and bamboo scraping feet Calibrating sides of the box, so that the full bond; cartridge righting, with his thumbnail scrape sides of corners; then put the auxiliary block, catch facial tissue with a cloth from the inside out, if glue stains with a cloth dipped in a little alcohol wipe clean; drain air it closely; drilling, to ensure the proper holes.
(5) self-test quality standards, engaging world covered, an inventory of the number and hang signage, post a check package.
(6) inspection items include: forming effects, bonding effect, surface cleanliness, smooth consistency as box body, firm and clean, brightness and so on.